 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
KY9983D SMT Adhesives
|
| Supply Ability: |
|
| Related proudcts |
epoxy adhesive, |
| Specifications |
KY9983D SMT adhesives is a kind of single epoxy resin adhesive |
| Price Term: |
FOB |
| Port of loading: |
Zhongshan |
| Minimum Order |
25PCS |
| Unit Price: |
|
|
KY9983D SMT adhesives is a kind of single epoxy resin adhesive .It is specially fit for SMT technology of sticking clips components stably in PCB board.Long-term preservation stability is expected.Moreover it is good for environment protection for its safety,no solvent and no smelling.
Features
1. Very good stable curing shapes without stringing and slumping are achieved at super high speed dispensing and very small dots
2. It could be curing in lower temperature than any other glue
3. Long-term preservation stability is expected.
4. High heat-resistivity and excellent electric properties are possessed.
Curing condition
1. The curing condition recommended is in 3.5 min after the PCB’s surface temperature has reached 150 °C
2. The longer the curing time is , the stronger adhesive strength can be obtained.
3.The components mounted on the PCB have different material , size , etc ,which also makes the actual temperature attached to the adhesive different. So please identify the most suitable curing conditions based on the actual production situation.
Specification
1.Printing method:super high speed dispensing
2.Composition:Epoxy resin
3.Color:Red
4.Specific gravity:1.3
5.Viscosity?5?5rpm:300Pa.S(300,000cps) ?90pa.S(390,000cps)
6.Thixotropy index:6.8(1rpm / 10rpm)
7.Adhesive Strength:Capacitance 0805C?.5?kg、Vitreous Diode 3.5?.5kg
7.Dielectric constant:3.62/1MHz
How to use
1. Adhesive should be preserved in refrigerator(below 2~10°C)to keep on its quality.
2.Make sure the cover of the container is tight
3. Before processing, the adhesive should be taken out from the refrigerator for de-freezing about 4 hours until it reaching the room temperature.
4. The bottom of printing screen should be cleaned timely for using methylbenzene or acetic ether.
5.Quality guarantee period is six months
Packing:
20ml/30ml/300ml
|
| Company: |
zhongshan conor electronic technology co.,ltd
|
| Contact: |
Ms. crystal tam |
| Address: |
NO.31 Jiangling Road Daling Huoju Development Zone Zhongshan |
| Postcode: |
528454 |
| Tel: |
86-760-89965962 |
| Fax: |
86-760-86135765 |
| E-mail: |
|
|
|
Home
